unknown
1970-01-01 00:00:00 UTC
:sudo make clean
rm -rf drivers/net/wireless/modules.order drivers/net/wireless/.*.cmd
drivers/net/wireless/*.o drivers/net/wireless/*.ko
drivers/net/wireless/*.mod.c drivers/net/wireless/.tmp_versions
drivers/net/wireless/*.symvers
Than I executed make install
:sudo make install
make -C /usr/src/linux-headers-2.6.24-19-generic
M=/home/remy/orinoco/orinoco/drivers/net/wireless
KERNELRELEASE=2.6.24-19-generic CONFIG_ADM8211= CONFIG_AIRO=
CONFIG_AIRO_CS= CONFIG_ARLAN= CONFIG_ATH5K= CONFIG_ATMEL= CONFIG_B43=
CONFIG_B43LEGACY= CONFIG_BCM43XX= CONFIG_HOSTAP= CONFIG_IPW2100=
CONFIG_IPW2200= CONFIG_IWL3945= CONFIG_IWL4965= CONFIG_LIBERTAS=
CONFIG_P54_COMMON= CONFIG_P54_PCI= CONFIG_P54_USB= CONFIG_PCI_ATMEL=
CONFIG_PCMCIA_ATMEL= CONFIG_PCMCIA_NETWAVE= CONFIG_PCMCIA_RAYCS=
CONFIG_PCMCIA_WAVELAN= CONFIG_PCMCIA_WL3501= CONFIG_PRISM54=
CONFIG_RT2X00= CONFIG_RTL8180= CONFIG_RTL8187= CONFIG_STRIP=
CONFIG_USB_ATMEL= CONFIG_USB_NET_RNDIS_WLAN= CONFIG_USB_ZD1201=
CONFIG_WAVELAN= CONFIG_ZD1211RW= CONFIG_HERMES=m CONFIG_PLX_HERMES=m
CONFIG_PCI_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.24-19-generic'
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/hermes.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/hermes_dld.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_cs.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_plx.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_pci.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_tmd.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_nortel.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/spectrum_cs.o
Building modules, stage 2.
MODPOST 9 modules
CC /home/remy/orinoco/orinoco/drivers/net/wireless/hermes.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/hermes.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/hermes_dld.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/hermes_dld.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_cs.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_cs.ko
CC
/home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_nortel.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_nortel.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_pci.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_pci.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_plx.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_plx.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_tmd.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_tmd.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/spectrum_cs.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/spectrum_cs.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-19-generic'
make -C /usr/src/linux-headers-2.6.24-19-generic
M=/home/remy/orinoco/orinoco/drivers/net/wireless
KERNELRELEASE=2.6.24-19-generic CONFIG_ADM8211= CONFIG_AIRO=
CONFIG_AIRO_CS= CONFIG_ARLAN= CONFIG_ATH5K= CONFIG_ATMEL= CONFIG_B43=
CONFIG_B43LEGACY= CONFIG_BCM43XX= CONFIG_HOSTAP= CONFIG_IPW2100=
CONFIG_IPW2200= CONFIG_IWL3945= CONFIG_IWL4965= CONFIG_LIBERTAS=
CONFIG_P54_COMMON= CONFIG_P54_PCI= CONFIG_P54_USB= CONFIG_PCI_ATMEL=
CONFIG_PCMCIA_ATMEL= CONFIG_PCMCIA_NETWAVE= CONFIG_PCMCIA_RAYCS=
CONFIG_PCMCIA_WAVELAN= CONFIG_PCMCIA_WL3501= CONFIG_PRISM54=
CONFIG_RT2X00= CONFIG_RTL8180= CONFIG_RTL8187= CONFIG_STRIP=
CONFIG_USB_ATMEL= CONFIG_USB_NET_RNDIS_WLAN= CONFIG_USB_ZD1201=
CONFIG_WAVELAN= CONFIG_ZD1211RW= CONFIG_HERMES=m CONFIG_PLX_HERMES=m
CONFIG_PCI_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m modules_install \
INSTALL_MOD_DIR=kernel/drivers/net/wireless
make[1]: Entering directory `/usr/src/linux-headers-2.6.24-19-generic'
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/hermes.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/hermes_dld.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_cs.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_nortel.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_pci.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_plx.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_tmd.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/spectrum_cs.ko
DEPMOD 2.6.24-19-generic
make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-19-generic'
/sbin/depmod -ae
Than I tried to modprobe the module again
:sudo modprobe orinoco_cs
:dmesg | grep eth1
[60841.725070] eth1: Hardware identity 0005:0004:0005:0000
[60841.725191] eth1: Station identity 001f:0001:0008:000a
[60841.725195] eth1: Firmware determined as Lucent/Agere 8.10
[60841.725198] eth1: Ad-hoc demo mode supported
[60841.725200] eth1: IEEE standard IBSS ad-hoc mode supported
[60841.725203] eth1: WEP supported, 104-bit key
[60841.728781] eth1: MAC address 00:02:2d:b3:20:f9
[60841.728883] eth1: Station name "HERMES I"
[60841.729449] eth1: ready
[60841.736406] eth1: orinoco_cs at 0.0, irq 11, io 0xc100-0xc13f
[60841.811268] ADDRCONF(NETDEV_UP): eth1: link is not ready
[101403.270338] eth1: New link status: Disconnected (0002)
I also made sure I had the firmware at the right location
:ls -l /lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
-rw-r--r-- 1 root root 65046 2008-08-22 20:57
/lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
:ls -l /lib/firmware/2.6.24-19-generic/orinoco.fw
-rw-r--r-- 1 root root 65046 2008-08-22 20:56
/lib/firmware/2.6.24-19-generic/orinoco.fw
:md5 /lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
4bc30fed682d83ce0bbeb32af6d218a3
/lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
:md5 /lib/firmware/2.6.24-19-generic/orinoco.fw
4bc30fed682d83ce0bbeb32af6d218a3
/lib/firmware/2.6.24-19-generic/orinoco.fw
:sha1 /lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
0fff9e1b61ab735e698d6390ffd60d0247ae1a0b
/lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
:sha1 /lib/firmware/2.6.24-19-generic/orinoco.fw
0fff9e1b61ab735e698d6390ffd60d0247ae1a0b
/lib/firmware/2.6.24-19-generic/orinoco.fw
As I said, I'm not a linux expert. I might me doing something wrong
here. If it's the case, but let me know so I can test it and correct it.
Regards,
Rémy Roy
rm -rf drivers/net/wireless/modules.order drivers/net/wireless/.*.cmd
drivers/net/wireless/*.o drivers/net/wireless/*.ko
drivers/net/wireless/*.mod.c drivers/net/wireless/.tmp_versions
drivers/net/wireless/*.symvers
Than I executed make install
:sudo make install
make -C /usr/src/linux-headers-2.6.24-19-generic
M=/home/remy/orinoco/orinoco/drivers/net/wireless
KERNELRELEASE=2.6.24-19-generic CONFIG_ADM8211= CONFIG_AIRO=
CONFIG_AIRO_CS= CONFIG_ARLAN= CONFIG_ATH5K= CONFIG_ATMEL= CONFIG_B43=
CONFIG_B43LEGACY= CONFIG_BCM43XX= CONFIG_HOSTAP= CONFIG_IPW2100=
CONFIG_IPW2200= CONFIG_IWL3945= CONFIG_IWL4965= CONFIG_LIBERTAS=
CONFIG_P54_COMMON= CONFIG_P54_PCI= CONFIG_P54_USB= CONFIG_PCI_ATMEL=
CONFIG_PCMCIA_ATMEL= CONFIG_PCMCIA_NETWAVE= CONFIG_PCMCIA_RAYCS=
CONFIG_PCMCIA_WAVELAN= CONFIG_PCMCIA_WL3501= CONFIG_PRISM54=
CONFIG_RT2X00= CONFIG_RTL8180= CONFIG_RTL8187= CONFIG_STRIP=
CONFIG_USB_ATMEL= CONFIG_USB_NET_RNDIS_WLAN= CONFIG_USB_ZD1201=
CONFIG_WAVELAN= CONFIG_ZD1211RW= CONFIG_HERMES=m CONFIG_PLX_HERMES=m
CONFIG_PCI_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.24-19-generic'
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/hermes.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/hermes_dld.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_cs.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_plx.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_pci.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_tmd.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_nortel.o
CC [M] /home/remy/orinoco/orinoco/drivers/net/wireless/spectrum_cs.o
Building modules, stage 2.
MODPOST 9 modules
CC /home/remy/orinoco/orinoco/drivers/net/wireless/hermes.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/hermes.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/hermes_dld.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/hermes_dld.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_cs.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_cs.ko
CC
/home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_nortel.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_nortel.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_pci.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_pci.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_plx.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_plx.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_tmd.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_tmd.ko
CC /home/remy/orinoco/orinoco/drivers/net/wireless/spectrum_cs.mod.o
LD [M] /home/remy/orinoco/orinoco/drivers/net/wireless/spectrum_cs.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-19-generic'
make -C /usr/src/linux-headers-2.6.24-19-generic
M=/home/remy/orinoco/orinoco/drivers/net/wireless
KERNELRELEASE=2.6.24-19-generic CONFIG_ADM8211= CONFIG_AIRO=
CONFIG_AIRO_CS= CONFIG_ARLAN= CONFIG_ATH5K= CONFIG_ATMEL= CONFIG_B43=
CONFIG_B43LEGACY= CONFIG_BCM43XX= CONFIG_HOSTAP= CONFIG_IPW2100=
CONFIG_IPW2200= CONFIG_IWL3945= CONFIG_IWL4965= CONFIG_LIBERTAS=
CONFIG_P54_COMMON= CONFIG_P54_PCI= CONFIG_P54_USB= CONFIG_PCI_ATMEL=
CONFIG_PCMCIA_ATMEL= CONFIG_PCMCIA_NETWAVE= CONFIG_PCMCIA_RAYCS=
CONFIG_PCMCIA_WAVELAN= CONFIG_PCMCIA_WL3501= CONFIG_PRISM54=
CONFIG_RT2X00= CONFIG_RTL8180= CONFIG_RTL8187= CONFIG_STRIP=
CONFIG_USB_ATMEL= CONFIG_USB_NET_RNDIS_WLAN= CONFIG_USB_ZD1201=
CONFIG_WAVELAN= CONFIG_ZD1211RW= CONFIG_HERMES=m CONFIG_PLX_HERMES=m
CONFIG_PCI_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m modules_install \
INSTALL_MOD_DIR=kernel/drivers/net/wireless
make[1]: Entering directory `/usr/src/linux-headers-2.6.24-19-generic'
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/hermes.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/hermes_dld.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_cs.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_nortel.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_pci.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_plx.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/orinoco_tmd.ko
INSTALL /home/remy/orinoco/orinoco/drivers/net/wireless/spectrum_cs.ko
DEPMOD 2.6.24-19-generic
make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-19-generic'
/sbin/depmod -ae
Than I tried to modprobe the module again
:sudo modprobe orinoco_cs
:dmesg | grep eth1
[60841.725070] eth1: Hardware identity 0005:0004:0005:0000
[60841.725191] eth1: Station identity 001f:0001:0008:000a
[60841.725195] eth1: Firmware determined as Lucent/Agere 8.10
[60841.725198] eth1: Ad-hoc demo mode supported
[60841.725200] eth1: IEEE standard IBSS ad-hoc mode supported
[60841.725203] eth1: WEP supported, 104-bit key
[60841.728781] eth1: MAC address 00:02:2d:b3:20:f9
[60841.728883] eth1: Station name "HERMES I"
[60841.729449] eth1: ready
[60841.736406] eth1: orinoco_cs at 0.0, irq 11, io 0xc100-0xc13f
[60841.811268] ADDRCONF(NETDEV_UP): eth1: link is not ready
[101403.270338] eth1: New link status: Disconnected (0002)
I also made sure I had the firmware at the right location
:ls -l /lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
-rw-r--r-- 1 root root 65046 2008-08-22 20:57
/lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
:ls -l /lib/firmware/2.6.24-19-generic/orinoco.fw
-rw-r--r-- 1 root root 65046 2008-08-22 20:56
/lib/firmware/2.6.24-19-generic/orinoco.fw
:md5 /lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
4bc30fed682d83ce0bbeb32af6d218a3
/lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
:md5 /lib/firmware/2.6.24-19-generic/orinoco.fw
4bc30fed682d83ce0bbeb32af6d218a3
/lib/firmware/2.6.24-19-generic/orinoco.fw
:sha1 /lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
0fff9e1b61ab735e698d6390ffd60d0247ae1a0b
/lib/firmware/2.6.24-19-generic/agere_sta_fw.bin
:sha1 /lib/firmware/2.6.24-19-generic/orinoco.fw
0fff9e1b61ab735e698d6390ffd60d0247ae1a0b
/lib/firmware/2.6.24-19-generic/orinoco.fw
As I said, I'm not a linux expert. I might me doing something wrong
here. If it's the case, but let me know so I can test it and correct it.
Regards,
Rémy Roy